IOD Silicone Blades

HOW TO USE THE IOD SILICONE PAINT BLADE – THE BASICS

When coating a surface with the paint blade, you’ll want to keep the following in mind:

• “Thin for the win” first coat
• Blade angle and pressure control the thickness of your paint
• Adding texture
• Adding color

The paint blade is fabulous for any flat or curved surface. And it will save you time and paint when working on porous materials, such as upcycled cabinet doors, plywood, and other unfinshed woods.

“THIN FOR THE WIN” BASE COAT

Think about the first coat you apply with the blade as almost like a Gesso or a primer.  A thin coat engages differently with your surface than a thick coat.  Your thick coat is more likely to shrink crack and not bond, whereas that thin coat is laying your base.  It’s a foundation to build on.

ANGLE THE TROWEL

The angle and the pressure on your trowel will determine the thickness that you achieve and whether you are adding or removing paint. An upright angle, where the trowel is almost a 90-degree angle, will remove paint from the surface.  If you lay the trowel down to a low angle, 45 degrees or so, and have less pressure, you’ll lay more paint down.  Play with the angle and pressure on the blade to get a feel for it.

Once the thin base coat is on and dry. Check it for any big chunks, lumps, or ridges. It happens and is no big deal. Just give them a quick rub with fine-grit sandpaper to knock them down, then wipe the dust off with a damp shop cloth. You want this first coat to be buttery smooth.

ADDING TEXTURE

When working with paint, you can use the IOD Silicone Paint Blade to add texture in two different steps.

First, you can add texture as part of your base layer. This is when you can play with different stroke movements to get different looks. You can use long, even strokes in the same direction, cross-hatch where you make a little ‘x’ for an Old World plaster feel, swirls to create a feeling of movement or perpendicular strokes for a more industrial vibe.

Watch us experiment with different base layer textures while we were developing the final IOD Silicone Paint Blade.

Second, you can use a stamp impressed technique to press designs into damp paint (you want to let it dry a bit before doing this – check out this tutorial for more details.)

TIPS FOR USING THE IOD SILICONE PAINT BLADE

If you need a lot of ‘open time’ (time that the paint is wet and workable) go on thick with a second coat. This would be the case if you’re trying a stamp impressed technique. If you find the paint is drying quicker than you can stamp, use a water mister to reactivate the paint a bit and keep it moist.

If you’re creating texture with stamp impressions, pick colors that contrast in some way. Mix warm and cool colors or a neutral base with a bright or dramatic pop color, or dark and light versions of the same color.

The beauty of this it’s not rocket science! This is just fun and very forgiving. You get in there and you play, get adventurous, push your limits and learn new things.

IT’S YOUR TURN TO PLAY!

Pay attention to that thin first coat and how it behaves as a primer and a bonding ground. Focus on controlling your paint thickness using the pressure and the angle of your blade. Look at the color movement and how you get the colors to engage differently depending on how you’re moving that blade over it.

 We can’t wait to see what you guys are gonna do with this!

CHECK OUT THESE POSTS TO LEARN SOME OF THE WAYS TO USE THE NEW IOD SILICONE PAINT BLADE