Tinsel Foil Transfer Pad

IOD Gilded transfers can be applied to many surfaces, depending on how they are prepared. For the best adhesion, we recommend
sealing painted or porous surfaces with a satin or semi-gloss
sealer and allowing it to dry thoroughly prior to applying your

FOUR FULL SHEETS OF LAVISH ELEMENTS
TO MIX AND MATCH AT WILI

Gilded transfer.
INSTRUCTIONSIOD TRANSFERS

APPLICATION
Start with a clean, dry, matte surface. If painted, make sure it’s well cured, and if you have sanded the paint make certain there is no residual dust. All of these things will interfere with adhesion. For best adhesion, seal your project surface with a high quality, water-based polyurethane sealer in matte before applying a transfer.

Carefully remove the transfer from its white backing. Slowly and carefully lower the transfer onto your intended surface, making sure that it does not touch until the placement is correct. Use small pieces of low tack tape to hold it in place.

Using the provided tool, or one of your choice, start at one end of the transfer and rub firmly to adhere the image to the surface. Do this until the entire image is transferred. You are welcome for the free arm workout as well. If any parts aren’t transferred when you lift, simply lay it back down and rub more on that portion. After it is transferred, with a clean dry hand, smooth down any bits that aren’t flatly adhered.

We recommend sealing with a water based (or not harsh solvent based) sealer (waxes created for chalk type paints also work well if they don’t contain harsh solvents).